Power over Ethernet (PoE) connections

The display can power PoE devices by connecting them using a network cable to one of the display’s NETWORK POE OUT connectors, located on the rear of the display.

ConnectionsPoEPoE connectionIn the example below, the combined power requirements of the 3 PoE devices does not exceed the 32 watts the display has available. All 3 devices can therefore be powered by the display, via PoE.

Figure 1. Example PoE connections

Note

  • The PoE devices should be connected using RayNet cables.

  • The ferrites supplied with your display must be used on all RayNet network connections.

  • In order to sufficiently power PoE devices, the display’s power supply must exceed 9.5 V dc.