Card reader location requirements

When selecting a location for the external card reader it is important to consider a number of factors.

Location requirementsGeneralFactors for consideration:

• Mounting surface — Ensure product is adequately supported on a secure surface. Do not mount units or cut holes in places which may damage the structure of the vessel.

• Cabling — Ensure the product is mounted in a location which allows proper routing, support and connection of cables:

  • The product should be located close to the display to which it is connected, ensuring that the cable is not stretched or pulled tight.

  • Minimum bend radius of 100 mm (3.94 in) unless otherwise stated.

  • Use cable clips to prevent stress on connectors.

  • If your installation requires multiple ferrites to be added to a cable then additional cable clips should be used to ensure the extra weight of the cable is supported.

• Water ingress — The product should be located it in a protected area away from prolonged and direct exposure to rain and salt spray.

• Electrical interference — Select a location that is far enough away from devices that may cause interference, such as motors, generators and radio transmitters / receivers.