The Raymarine name plaque located below the Back button
on Axiom® 2 Pro displays can
be replaced with an OEM-branded name plaque. OEMs can order bulk packs
(qty: 40) of blank name plaques (part number: A80724), which can then have the OEM branding printed on them.
Name plaqueFollow the steps below
to replace the name plaque.
Important
Do NOT use
metallic or sharp objects to remove the keypad or infill piece, as
this could damage the keypad and/or display.
Open the card reader door.
Axiom 2 Pro 12 and Axiom 2 Pro 16 only — Using a plastic
pry tool, lever the infill piece located below the lower keypad against
the small plastic protrusion. This will release the infill piece from
the display.
Using a plastic pry tool, lever the bottom of the keypad
against the small plastic protrusion to release the keypad from the
display.
Using a plastic pry tool, lever the bottom of the name
plaque approximately one third of the way along the bottom of the
name plaque to release it from the display.
Insert one edge of the new name plaque and then apply pressure
to the opposite side until it clicks into position.
Insert one edge of the keypad and then bend the keypad
slightly in the middle to allow the other edge to be inserted into
the opposite side.
Axiom 2 Pro 12 and Axiom 2 Pro 16 only — Insert one edge
of the infill piece and then bend the infill piece slightly in the
middle to allow the other edge to be inserted into the opposite side.
Close the card reader door.
Find topics by title
Topic finder activated by typing “t”. Continue typing to filter
the list of topics.
Use ↑ and ↓ to navigate the results; then press ENTER to
view a topic, or ESC to close this dialog.
Keyboard shortcuts
You’ve activated the keyboard shortcuts help by typing “?”.
t
Open the topic finder to filter the list of topic titles
s
Use the search field to find text in topic content
