LED diagnostics

Power port LED

TroubleshootingPower LED diagnostics

LED indication

LED Status and required action

(Green) Powered up / Ok

Normal operation — no user action is required.

(Red) Fault

Consider contacting your local dealer or Raymarine Product Support; for contact details, refer to: Raymarine product support and servicing

(No color) No power

Refer to the advice found in the following section: Power up troubleshooting

Port speed / activity LEDs (1 / 2 / 3 / 4 / 5)

TroubleshootingNetwork LED diagnostics

LED indication	LED Status and required action
	(Green) 1,000 Mbits/s Ethernet Active (no transfer) Normal operation — no user action is required.
	(Green) 1,000 Mbits/s Ethernet Active (transferring) Normal operation — no user action is required.
	(Amber) 10 / 100 Mbits/s Ethernet Active (no transfer) Normal operation — no user action is required.
	(Amber) 10 / 100 Mbits/s Ethernet Active (transferring) Normal operation — no user action is required.
	(No color) No network activity detected Check the cable connection for the port. Check any additional connections. Check that the unit connected to the switch is powered on. Check that the unit connected to the switch is currently transferring data. This can be confirmed by performing an action on the multifunction display / chartplotter that initiates data transfer for the relevant unit — for example, if you suspect a problem with the port corresponding to a connected radar scanner, range in or out in the radar application to initiate data activity.