Testing the transducer

Transducer operation should be checked before installation. For the purposes of this test you do not need to assembly the connector locking collar.

InstallationTestingFor detailed information on using the Fishfinder / Sonar app please refer to the operation instructions for your MFD.

  1. Connect the transducer to the relevant connector on your MFD or sonar module that is connected to your MFD.
  2. Fully submerge the transducer in water.
  3. Power up your MFD and / or Sonar module.
  4. Open a Fishfinder / Sonar app on your MFD.
  5. If required, select the relevant transducer from the Transducer settings tab (Menu > Transducer > Transducer).
  6. If required, select the relevant channel from the Channel selection options (Menu > All channels).
  7. Check that accurate depth and where applicable temperature readings are displayed.
  8. If you experience difficulties obtaining readings then contact Raymarine® Technical Support.