RealVision transducer cable connector dimensions

The dimensions of the transducer cable and cable connector are shown below.

Figure 1. Cable connector dimensions

Dimensions

Dimension

A

32.00 mm (1.26 in)

B

25.00 mm (1.00 in)

C

96.00 mm (3.80 in)

D

Cable length:Cable length

  • Single (All-in-one) transducer fitted cable length: 8 m (26.2 ft).

  • Split pair transducer fitted cable length: 2 m (6.5 ft).

E

This dimension is dependent on your MFD variant. Refer to your MFD installation instructions.

F

This dimension is dependent on your MFD variant. Refer to your MFD installation instructions.

G

35.00 mm (1.40 in)
Note

For installations where space behind the display is limited, a right-angled transducer cable adaptor is available (A80515). Using the right-angled cable adaptor will reduce dimension E (listed above) by 20 mm (0.79 in.)