Parts required (trunnion mount installations)
The following parts are required to trunnion mount the display.
InstallationTrunnion mountingParts requiredMountingTrunnion mountingParts required
Part |
Axiom+ 7 |
Axiom+ 9 / 12 |
|---|---|---|
Trunnion adaptor |
• |
|
Trunnion bracket |
• |
• |
(1) Self tapping screws |
• |
• |
(1) Self tapping screw requirements will vary depending which Axiom+ display size variant you are attempting to install:
Axiom+ 7 display: Requires 4x self tapping screws — suitable for the mounting surface material and the 4.20 mm (0.17 in) diameter trunnion bracket mounting holes.
Axiom+ 9 / 12 display: Requires 5x self tapping screws — suitable for the mounting surface material and the 5.75 mm (0.23 in) diameter trunnion bracket mounting holes.
If you wish to trunnion mount your display and the required parts are NOT supplied with your product, refer to the following section: