IMPORTANT — Configure before use

DANGER

Before first use this product must be correctly configured using a PC (Personal Computer) and the ProAIS2 software, which can be downloaded from the Raymarine website: www.raymarine.com/software

  • Failure to configure the product will prevent correct operation.

  • Configuration MUST include programming the product with an MMSI number. In some regions (such as the United States), the MMSI must be programmed by a qualified dealer or installer.

  • Once the MMSI number has been entered using the ProAIS2 software and the configuration saved (via the “Write Configuration” option), the MMSI number cannot be subsequently changed, without returning the unit to an authorized Raymarine dealer for reprogramming. Always check the MMSI number before saving the configuration.

  • Incorrect / incomplete configuration can cause erroneous data and prevent your product from transmitting.

  • If an MMSI number is not programmed the product will operate as an AIS receiver only and will NOT transmit AIS information for your vessel.