EV-2 software release history
The list below is a cumulative list of the general improvements introduced in subsequent releases of the EV-2 software, since the initial release (v1.00) (2013). Software releases include any combination of new features, performance improvements, and bug fixes.
Software release history
EV-2 software download link |
|---|
| www.bit.ly/ev2-download |
EV-2, v3.17
(Software release date: February 2024)
General improvements: |
|---|
Added support for a new LED indicator ‘Switch off’ setting which can be toggled via a networked LightHouse 4 multifunction display (running software version v4.6.74 or later). For more information, refer to: Switching off sensor LEDs |
Added support for a new LED indicator ‘Find me’ setting which can be toggled via a networked LightHouse 4 multifunction display (running software version v4.6.74 or later). For more information, refer to: Find me |
Added ability to Steer to Target wind angle from polar, using a compatible autopilot controller. |
Fixed issues: |
|---|
No bug fixes in this release. |
EV-2, v3.14
(Software release date: March 2023)
General improvements: |
|---|
Added compatibility with Axiom-Series and Axiom 2-Series MFDs / chartplotters running LightHouse 4, v4.4.70 (or later). |
Fixed issues: |
|---|
No bug fixes in this release. |
EV-2, v3.13
(Software release date: December 2022)
General improvements: |
|---|
Added compatibility with other Raymarine devices requiring internal component changes (due to component obsolescence). |
Fixed issues: |
|---|
Resolved crash when connected to Yanmar® systems. |
Resolved issue where the autopilot’s Auto Tack feature tacked in the wrong direction. |
Resolved issue when connected to a SeaTalk 1 to SeaTalk NG Converter creating false alarms. To fully resolve this issue, ensure that the SeaTalk 1 to SeaTalk NG Converter is upgraded to the latest software. |
EV-2, v3.05
(Software release date: August 2020)
General improvements: |
|---|
Update to the second CAN port to allow communications with Yanmar® engines. |
Fixed issues: |
|---|
No bug fixes in this release. |
EV-2, v3.02
(Software release date: July 2018)
General improvements: |
|---|
Improved address claim handling to correct compatibility issues with EV-2 and Teleflex Optimus steering systems, which could cause the alarm 'No Drive Detected' if engine was powered off for a period of time. |
Fixed issues: |
|---|
No bug fixes in this release. |
EV-2, v3.01
(Software release date: June 2018)
General improvements: |
|---|
Added compatibility with internal component changes for EV-2 (due to component obsolescence). |
Fixed issues: |
|---|
No bug fixes in this release. |
EV-2, v2.18
(Software release date: May 2017)
General improvements: |
|---|
Improves the management of Waypoint numbers from third-party pilot systems. |
Fixed issues: |
|---|
Corrected a "No Navigation" fault error that can occur if entering Track mode from data via multiple third-party pilot systems. |
EV-2, v2.17
(Software release date: May 2016)
General improvements: |
|---|
Track Acquisition & Track Keeping enhancements. |
Vane mode – Wind steering Performance enhancements. |
Auto Tack improvements. |
Windshift Alarm improvements – including the ability to switch off. |
Enhanced Compass Calibration Routine for EV-Series sensors. |
NMEA 2000 improvements. Note p70-Series products must be running software version v3.05 (or later). |
Fixed issues: |
|---|
No bug fixes in this release. |
EV-2, v1.11
(Software release date: September 2014)
General improvements: |
|---|
Improved SeaTalk NG bus address claim handling. |
Fixed issues: |
|---|
Corrects an issue with third-party equipment transmitting incomplete navigation data causing Tracking and 'No Pilot' errors. |
EV-2, v1.08
(Software release date: June 2014)
General improvements: |
|---|
The EV-2 is now fully compatible with ZF Powerboat Drive-By-Wire (DBW) steering systems. |
Further improvements to the Speed data selection algorithm to resolve issues where the incorrect speed is transmitted from some engines. |
Supports the selection of “STW”, “SOG” or “Default” from the Pilot Calibration options. Note p70-Series products must be running software version v2.12 (or later). |
Factory calibration of Magnetometer alignment improved to enhance heading accuracy. |
Fixed issues: |
|---|
No bug fixes in this release. |
EV-2, v1.06
(Software release date: April 2014)
General improvements: |
|---|
The Pilot now uses the highest value of bus speed from SOG or STW; this eliminates the pilot instability issues seen on some vessels that have a faulty or STW paddle wheel Transducer which has not been inserted. |
For vessels that don’t have SOG or STW data sources, Cruising Speed is now selectable in Pilot Vessel Settings when Cal Lock is switched off. |
Fixed issues: |
|---|
Heading errors caused by vessels undertaking a fast banked turn have now been corrected. This was previously seen as poor overlay performance. |
EV-2, v1.00
(Software release date: 2013)
General improvements: |
|---|
Initial public release. |