Engine data

In order for engine data to be available a supported engine management system must be connected to the same network as your chartplotter and the Propulsion system setting must be set to Combustion. Depending on your engine manufacturer, a compatible engine interface or gateway may be required.

Note

The Engine data category and related data items are not available when Electric has been selected for the vessel’s Propulsion system during the chartplotter’s initial start up wizard, or in the Boat details settings menu.

The number of engines can be changed from your chartplotter’s Boat details settings menu: Homescreen > Settings > Boat details > Num of engines.

Engine dataDataEngineSystems configured with more than 1 engine will have a subcategory for each engine and an All engines subcategory.

The following items will be available for each engine.

Data items:

Engine RPM combo gauge(1)

Alternator (PGN 127489)

Boost pressure (PGN 127488)

Coolant pressure (PGN 127489)

Coolant temperature (PGN 127489)

Engine economy total(2)

Engine economy average (trip)(2)(3)

Engine hours (PGN 127489)

Engine load (PGN 127489)

Engine trip (PGN 127497)

Fuel flow (PGN 127489)

Fuel flow (average) (PGN 127497)

Fuel flow (instantaneous) (PGN 127489)

Fuel flow rate (total)(2) (PGN 127497 / PGN 127489)

Fuel pressure (PGN 127489)

Gear (PGN 127493)

Jack plate position (PGN 128780)

Oil pressure (PGN 127489)

Oil pressure status (PGN 127489)

Oil temperature (PGN 127489)

RPM (PGN 127488)

Tilt position (PGN 127488)

Transmission oil pressure (PGN 127493)

Transmission oil temperature (PGN 127493)

Trip hours(2) (PGN 127496)

Note
  1. This data item is only available in the Data app and Dashboard app.

  2. In systems configured with more than 1 engine these data items will appear in the All engines subcategory.

  3. This data item is only available when Suzuki is selected as the system engine manufacturer.