Autopilot modes ContentsSupported autopilot modesAutopilot modes are accessed by pressing the MODE button. The following modes are supported:Unsupported autopilot modesDisengaging the autopilot — STBYWhen the autopilot is engaged in any mode it can be disengaged from the remote.Engaging the autopilot — Steer to Heading (AUTO)When the AUTO button is pressed the autopilot will engage Steer to Heading mode. This mode is also commonly referred to as “Locked Heading” mode.Engaging the autopilot — Steer to NavigationWhen there is active navigation on a connected chartplotter the remote can engage the autopilot in Steer to Navigation mode.Engaging the autopilot — Steer to WindSteer to Wind modes can be engaged from the remote.Engaging the autopilot — Power steerThe remote can command the rudder directly.Steer to HeadingIn Steer to Heading mode, your autopilot follows a locked heading.Steer to NavigationIn Steer to Navigation mode, your autopilot will navigate to a waypoint, GoTo, or follow a route that has been initiated from your chartplotter.Steer to wind modesSteer to wind modes use your autopilot to steer your vessel to the wind. You can steer either to the Apparent Wind Angle (AWA), True Wind Angle (TWA), or to a target wind angle from a polar table.Power steerPower steer mode enables you to directly control the rudder using the remote’s Left and Right buttons.Previous topic: Getting startedNext topic: Data pages