Main menu

Lock keypad

Locks the remotes buttons. This setting is not shown if Lock keypad has been configured as the shortcut.

Cancel countdown

Cancels a running countdown. This setting is only shown if the countdown is running.

Advance waypoint

Advances navigation to the next waypoint in a route. This setting is only shown in Steer to Navigation mode. This setting is not shown if it has been configured as a shortcut.

Restart XTE

Restart you current track at your vessel’s current position. This setting is only shown in Steer to Navigation mode.

Tack to port

Perform a Tack to port side. This setting is only available in Steer to Wind modes when heading upwind.

Tack to starboard

Perform a Tack to starboard side. This setting is only available in Steer to Wind modes when heading upwind.

Gybe

Perform a Gybe. This setting is only available in Steer to Wind modes when heading downwind. This setting will not be shown if the Gybe inhibit setting in your chartplotter is set to Prevent Gybe.

Customize page

Select to customize the data page you were on when you opened the menu.

For information about customizing data pages refer to: Customizing a data page.

Add data page

Select to create a new data page. The setting will not be available if the remote already has 10 data pages.

For information about adding data pages refer to: Creating a data page

Alarms

Open the Alarms settings to configure alarms.

For information about available Alarms refer to: Alarms

Solo sailor

Enable and disable Solo sailor.

For information about Solo sailor refer to: Solo sailor

Pilot settings

Open the Pilot settings menu.

For Pilot settings refer to: Pilot settings menu

Settings

Open the Settings menu.

For Settings refer to: Settings menu