Assigning a display group and synchronizing settings

Display groups are groups of multiple displays which share common and synchronized settings, such as screen brightness, for example. By default, your performance display is not assigned to a display group.

SettingsDisplay group

Note

  • Before attempting to synchronize your device, ensure that all units are powered and operational.

  • For information on how to assign and unassign a display group on your chartplotter, refer to your chartplotter’s Advanced Operation Instructions.

To assign a display group:

  1. Navigate to: Data page view > Overlay menu > Settings > Display group.
  2. Select Group.
  3. Select the display group that you want to assign your performance display to.

    The following groups are available:

    • None (default)

    • Helm 1

    • Helm 2

    • Cockpit

    • Flybridge

    • Mast

    • Group 1–5

  4. Once a display group has been assigned, select the setting(s) that you want to synchronize between your performance display and any other compatible devices that you have assigned to the same display group.
    Note

    For information on which devices are compatible with the Brightness, Screen lock and Power-save mode settings, refer to: Display group settings

  5. Select Sync.
  6. Once your devices have finished synchronizing, a Group (setting name) enabled pop-up is displayed at the top of your screen.

After the synchronization process has completed, adjustments to your Brightness, Screen lock and / or Power-save mode settings will be applied to each supported device assigned to the same display group.