Time Setting

OperationWeb interfaceRemote Setting menuSystem Config settingsTime Setting

Menu item and description Option(s)

Date Format — (Date / Time tab)

Enables you to change the date format.

If the Time Display setting has been enabled under Camera Config > OSD Config > Time Display > Enable, any change made here will be reflected upon the onscreen display.

  • YY-MM-DD

  • MM-DD-YY

  • DD-MM-YY

Time Format — (Date / Time tab)

Enables you to change the time format.

If the Time Display setting has been enabled under Camera Config > OSD Config > Time Display > Enable, any change made here will be reflected upon the onscreen display.

  • 12 Hour

  • 24 Hour

Device Date Time — (Date / Time tab)

Enables you to synchronize the camera’s time and date settings with the time and date settings of a connected device.

To synchronize the camera’s time and date settings, press the button located on the right hand side of the table.

  • Sync with PC date time

NTP Timing — (Date / Time tab)

Allows you to Enable or Disable Network Time Protocol settings.

  • Open

  • Close

Time Zone — (Date / Time tab)

Enables you to select between 37 different time zones.

This setting is only available if you have set the NTP Timing setting to Open.

  • GMT -12:00 — GMT +13:00

Sync Interval — (Date / Time tab)

Enables you to select how often the camera’s time and date settings are (re)synchronized.

This setting is only available if you have set the NTP Timing setting to Open.

  • 01 Hour — 12 Hour

Server Address — (Date / Time tab)

Enables you to select between 8 preset internet time servers or to input a different time server manually by typing into the Server Address box.

If you are experiencing accuracy issues with your camera’s time and date settings, it is recommended that you try a different server.

This setting is only available if you have set the NTP Timing setting to Open.

  • pool.ntp.org

  • time.windows.com

  • time.nist.gov

  • time-nw.nist.gov

  • ntp1.inrim.it

  • time.kriss.re.kr

  • time.nuri.net

  • time.apple.com

Enable DST — (DST tab)

Allows you to enable or disable the DST (Daylight Saving Time) settings.

  • Open

  • Close

Daylight Saving Time Mode — (DST tab)

Enables you to change the Daylight Saving Time settings format between either a drop-down calendar or a MM-DD formatted cascade menu.

This setting is only available if you have set the Enable DST setting to Open.

  • Date

  • Week

Time Offset — (DST tab)

Enables you to change the amount of time that is offset during the DST (Daylight Saving Time) start and end dates.

This setting is only available if you have set the Enable DST setting to Open.

  • 1 Hour

  • 2 Hour

Start Time — (DST tab)

Enables you to select when DST (Daylight Saving Time) starts.

This setting is only available if you have set the Enable DST setting to Open.

  • Month / Date / Day — H / M / S

End Time — (DST tab)

Enables you to select when DST (Daylight Saving Time) ends.

This setting is only available if you have set the Enable DST setting to Open.

  • Month / Date / Day — H / M / S