Restore Default

OperationWeb interfaceRemote Setting menuSystem Maintain settingsRestore Default

Menu item and description	Option(s)
Simple Recovery Enables you to reset the camera settings back to factory default. The Web browser user interface may stop responding once you have pressed the Save button. If this occurs, it is recommended that you wait until the camera starts to respond.	Selected Unselected
Full Recovery Enables you to reset both the camera settings and IP address back to factory default. The Web browser user interface may stop responding once you have pressed the Save button. If this occurs, it is recommended that you wait until the camera starts to respond. The camera IP address will change after initiating a Full Recovery. For instructions on how to find out the camera’s IP address, refer to the following section: Camera setup via Windows 10 or Apple Mac PC	Selected Unselected
Reboot Enables you to power reboot the camera. If you are experiencing problems with the CAM300, it is recommended that you perform a Reboot before attempting either the Simple Recovery or Full Recovery option. The Web browser user interface may stop responding once you have pressed the Save button. If this occurs, it is recommended that you wait until the camera starts to respond.	Selected Unselected

Menu item and description

Option(s)

Simple Recovery

Enables you to reset the camera settings back to factory default.

The Web browser user interface may stop responding once you have pressed the Save button. If this occurs, it is recommended that you wait until the camera starts to respond.

Selected
Unselected

Full Recovery

Enables you to reset both the camera settings and IP address back to factory default.

The Web browser user interface may stop responding once you have pressed the Save button. If this occurs, it is recommended that you wait until the camera starts to respond.

The camera IP address will change after initiating a Full Recovery. For instructions on how to find out the camera’s IP address, refer to the following section: Camera setup via Windows 10 or Apple Mac PC

Selected
Unselected

Reboot

Enables you to power reboot the camera.

If you are experiencing problems with the CAM300, it is recommended that you perform a Reboot before attempting either the Simple Recovery or Full Recovery option.

The Web browser user interface may stop responding once you have pressed the Save button. If this occurs, it is recommended that you wait until the camera starts to respond.

Selected
Unselected