Network Config

OperationWeb interfaceRemote Setting menuNetwork Config settingsNetwork Config

Menu item and description	Option(s)
IP Type ⁽⁶⁾ Enables you to change whether the camera’s IP address is Static or assigned via DHCP (Dynamic Host Configuration Protocol). By default, this setting is set to DHCP.	DHCP Static
Auto IP ⁽⁶⁾ Allows you to change whether the camera’s IP address is automatically assigned. By default, this setting is set to Disable.	Enable Disable
IP Address Enables you to manually configure your camera’s IP address. This setting is only available if you have set the IP Type setting to Static.	IP Address Field
Subnet Mask Enables you to configure your Subnet Mask setting. This setting is only available if you have set the IP Type setting to Static.	Subnet Mask Field
Gateway Enables you to configure your default Gateway setting. This setting is only available if you have set the IP Type setting to Static.	Gateway Field
Primary DNS Enables you to configure your Primary DNS (Domain Name System) setting.	Primary DNS Field
Alternate DNS Enables you configure your Alternative DNS (Domain Name System) setting.	Alternate DNS Field
MAC Address Enables you to view your MAC address.

Important

(6) Changing either setting may cause issues to occur when attempting to connect the CAM300 to a multifunction display. It is recommended that these settings are left as default. If IP address issues are experienced after changing either setting, attempt to use the ONVIF Device Manager to rediscover your camera’s assigned IP address.