Internet Explorer dependent settings

Enable — (Human Shape Detection tab)

Allows you to Enable or Disable the Human Shape Detection setting, which causes a green stick-figure icon to be displayed on the browser interface when a human shape is detected by the camera.

• Enable

• Disable

Sensitivity — (Human Shape Detection tab)

Enables you to change the sensitivity of the Human Shape Detection setting.

This setting is only available if you have Enabled the Human Shape Detection setting.

• High

• Middle

• Low

Enable — (Motion tab)

Allows you to Enable or Disable the Motion Detection setting, which causes a green ‘M’ to be displayed in the browser interface when motion is detected by the camera.

Additional onscreen indicators can be triggered via the Motion Detection setting. These onscreen indicators can be found within the following section: AI Intelligence > Overlay Settings.

• Enable

• Disable

Sensitivity — (Motion tab)

Enables you to change the sensitivity of the Motion Detection setting.

This setting is only available if you have enabled the Motion Detection setting.

• High

• Middle

• Low

Schedule ⁽³⁾ — (Schedule tab)

Enables you to select which times and days of the week you wish the camera’s detection settings to trigger.

By default, the entire Schedule grid will be automatically highlighted green (enabled).

• To enable an hour period, click the corresponding cell to turn it green.

• To disable an hour period, click the corresponding cell to turn it gray.

• To enable or disable multiple cells at once, click and drag starting from the top left, and down to the bottom right of the cell block that you wish to change.

• All Day

• Manual Input

Defense Area — (Defense Area tab)

Enables you to select a Defense Area on the video feed preview which will be monitored for activity. Any activity outside of the defined area will not be monitored by the camera for alarm activity.

• To add a Defense Area, click and drag one of the 6 preset shapes located on the right hand side of the screen to the view feed preview.

• To move a Defense Area, click and drag the frame of the shape to your desired position.

• To adjust a Defense Area, click and drag one of the red points to change the frame to your desired shape.

• To clear all Defense Areas drawn, click the CLEAR button located underneath the video preview.

This setting will only function if you have enabled either the Human Shape Detection or Motion Detection feature.

• Triangle

• Rectangle

• Pentagon

• L-shape

• Heptagon

• T-shape

• CLEAR

Human Frame

Enables you to select whether a box is displayed around a “humanoid” object when motion is detected by the camera. The box will follow the “humanoid” object as it moves within the frame.

This feature can be toggled On and Off for both the camera’s Main Stream and Subcode Stream.

This feature will detect motion across the entire frame unless you have defined a specific Defense Area.

This feature will run permanently unless you have defined a specific Schedule.

• On

• Off

Protective Frame

Enables you to select whether a colored box is displayed around the Web browser window if an alarm is triggered. The box will change color from green (no activity detected) to red (activity detected) if alarm activity is detected.

This feature can be toggled On and Off for both the camera’s Main Stream and Subcode Stream.

This feature will detect motion across the entire frame unless you have defined a specific Defense Area.

This feature will run permanently unless you have defined a specific Schedule.

• On

• Off

Upgrade file path

Enables you to select and update the camera’s firmware from a file located on your local drive.

Firmware update files can be downloaded from the Raymarine® website: www.raymarine.com/software

If in doubt as to the correct procedure for updating your product software, refer to your dealer or Raymarine technical support.

• Scan

• Upgrade