Vessel hull type selection

The vessel hull type options are designed to provide optimum steering performance for typical vessels.

It is important to complete the vessel hull type selection as part of the initial set-up wizard, as it forms a key part of the autopilot calibration process. You can also access the options at any time with the pilot in Standby by selecting MENU > Set-up > Autopilot Calibration > Vessel Settings > Vessel Hull Type.

As a general guide, select the option that most closely matches your vessel type and steering characteristics. The options are:
  • Race Sail.
  • Sail Cruiser.
  • Catamaran.
  • Workboat.
  • RIB.
  • Outboard Speedboat
  • Inboard Speedboat
  • Power Cruiser 1 (<12 kts)
  • Power Cruiser 2 (<30 kts)
  • Power Cruiser 3 (>30 kts)
  • Sport Fishing
  • Pro Fishing

It is important to be aware that steering forces (and therefore rate-of-turn) vary significantly depending on the combination of vessel type, steering system, and drive type. Therefore, the available vessel hull type options are provided for guidance only. You may wish to experiment with the different vessel hull type options, as it might be possible to improve the steering performance of your vessel by selecting a different vessel type.

When choosing a suitable vessel type, the emphasis should be on safe and dependable steering response.

Important If you change the vessel type after completing the Dockside calibration process (using the Dockside wizard), all commissioning settings will be reset to default settings, and you will need to complete the Dockside calibration process again.