Using a fishing pattern

  1. Press the RIGHT SOFT button to open the menu.
  2. Using the UP and DOWN buttons highlight Mode and press SELECT.
  3. Using the UP and DOWN buttons highlight Pattern and press SELECT.
  4. Using the UP and DOWN buttons highlight the fishing pattern you wish you use and press SELECT.
  5. The pattern settings screen shall be displayed, showing the parameters currently set for the selected pattern. If you want to change any of the parameters:
    1. Select the parameter you want to change, then press EDIT.
    2. Use the UP and DOWN buttons to set the value you want, then press SAVE to save the setting and return to the Pattern settings screen.
    3. Repeat steps i and ii as necessary, for the other parameters.
  6. Where appropriate, engage the wheel pilot clutch or attached the tiller pushrod.
  7. With the pattern settings screen displayed, press AUTO. The autopilot then steers the boat over the fishing pattern you selected.
To return to manual steering at any time, press STANDBY and then, where appropriate, disengage the wheel pilot clutch or tiller pushrod.

The 2 most commonly used fishing patterns are available from the Mode menu as Pattern 1 and Pattern 2, you may select and then complete steps 5 and 6 above to quickly use your favorite patterns.