Performing Auto learn

Auto learn is available from the Sea trial wizard, or from the Commissioning menu.
Maintain a normal cruising speed (at least 3 kts) throughout the auto learn process.
  1. Ensure there is sufficient free water in front of the vessel and select continue.
    A warning message is displayed.
  2. Select Continue or press the Ok button.
    A warning message will be displayed letting you know that the vessel will zigzag and make Sudden SHARP TURNS.
  3. Remove your hands from the wheel and press Auto to begin.
    During this procedure the autopilot will progress through the required steps.
  4. If ‘PASS’ is displayed then select Continue or press the Ok button to return to manual helm control.
    The autopilot will by placed in Standby mode. You have successfully completed the commissioning process for your SmartPilot system.
  5. If ‘FAIL’ is displayed after completion of the Auto learn process then select Continue or press the Ok button.
    The Auto learn retry message is displayed.
  6. You can retry the Auto learn process by selecting Yes or to cancel select No.
Note The Sea trial wizard can be cancelled at any time by pressing the Standby button.