Assigning A Network Group

To enable the shared brightness and color, displays must be assigned to the same network group.
Network groupsCompatible instrument displays and pilot controllers will also share their color scheme.
From the Network Group menu: Menu > Set-up > System Set-up > Network Group
  1. Select the network group that you want to assign the display to.

    Available groups are:

    • None

    • Helm 1

    • Helm 2

    • Cockpit

    • Flybridge

    • Mast

    • Group 1 — Group 5

  2. Select Brightness/Color Group.
  3. Select This Group.
  4. Select Sync.
    The System will now synchronize all displays assigned to the same group.
  5. Select OK.
  6. Carry out steps 1 to 5 on all displays.

When the brightness level is adjusted it will effect all displays assigned to the same group.