Aligning the rudder

For systems that have a rudder reference transducer fitted, Rudder alignment is included in the dockside wizard and occurs after drive type selection. For systems without a rudder reference transducer fitted, rudder alignment is not required.

Aligning the rudder
Dockside wizardRudder alignment (Evolution)

Scenario

Description

The following procedure only applies to vessels with a rudder reference transducer.
  1. Select Continue.
  2. Center the rudder and select OK.
  3. Put the rudder all the way to port and press OK.
  4. Put the rudder all the way to starboard and press OK.
  5. Center the rudder and select OK.
  6. Select Continue when the task complete message is displayed to progress to the rudder limit page.