Boat details

Min safe height:Safe height, minimum

Enter your vessel’s maximum unladen height from the waterline. To ensure adequate clearance, it is recommended that you add a safety margin to this figure to allow for variation caused by vessel movements.

Min safe width:Safe width, minimum

Enter your vessel’s maximum width at its widest point. To ensure adequate clearance on both sides, it is recommended that you add a safety margin for port and starboard to this figure to allow for variation caused by vessel movements.

Min safe depth:Safe depth, minimum

Enter your vessel’s maximum depth when fully laden. This is the depth from the waterline to the lowest point on the vessel’s keel. To ensure adequate clearance, it is recommended that you add a safety margin to this figure to allow for variation caused by vessel movements.

Num of engines:Engine selection

You can configure your system to display data for up to 2 engines, when connected to a compatible engine management system.

Identify engines:Engine connection wizard

Once you have selected the number of engines, select Identify engines and follow the onscreen instructions to configure your engines. May require an extra hardware interface to enable engine data to be displayed.

Fuel tanks:Fuel tank selection

You can configure your system to display data for up to 2 fuel tanks.

Fresh water tanks:Fresh water tank selection

You can configure your system to display data for up to 2 fresh water tanks.

Live well tanks:Live well tank selection

You can configure your system to display data for up to 2 Live well tanks.

Gray water tanks:Gray water tank selection

You can configure your system to display data for a Gray water tank.

Black water tanks:Black water tank selection

You can configure your system to display data for a Black water tank.

Batteries:Battery selection

You can configure your system to display data for up to 3 batteries.

Transducer:Transducer selection

You can select the transducer type that is connected to your display.