Set camera to Ball-Down mode

Set your camera to Ball-Down mode for Ball-Down (upside down) installations.

OperationBall-down modeBall-down mode
Note

The following steps will affect all camera payloads (thermal and visible-light).

  1. Login to your camera’s Web browser.
  2. Select the PTZ (Pan Tilt Zoom) tab.
  3. Scroll down and select Advanced Settings.
  4. Scroll down to the Ball-Down setting and select On. The camera is now set to Ball-Down mode.
  5. To save these settings: select System Settings.
  6. Select Firmware & Info.
  7. Under System Default Settings select Save. A notification will pop up to confirm this action.
  8. Under Reset factory default and reboot select Reboot and select Yes from the pop up to confirm.
  9. After the camera has successfully rebooted it will be set to Ball-Down mode.
Note

Ball-Down mode can be reverted by repeating the steps above and selecting Off for the Ball-Down setting.